Brushing effect on the retentive force of retentive inserts in three denture attachments: An in vitro study
2.
Effect of Soft Lining Material Properties on Maximum Pressure Transmission and Shore a Hardness
3.
Effect of thermocycling on the retentive force of the retentive inserts in three denture attachments and their water absorption ability
4.
Effect of Restoration Design on the Removal Torque Loss of Implant-supported Crowns after Cyclic Loading
5.
In vitro damping and strain distribution for implant-supported crowns using 5 different CAD-CAM crowns and 3 different luting cements
6.
Effect of thermocycling on tensile bond strength of autopolymerized, heat-polymerized, milled, and 3D printed denture base materials bonded to 4 different denture liners: an in vitro study
7.
Effect of toothbrushing on surface roughness and gloss of CAD-CAM versus conventional interim materials with different surface treatments
8.
Brushing effect on retentive force and surface roughness of three overdenture attachment patrices: An in vitro study
9.
In vitro evaluation of disinfection efficacy and physical properties of polyether impression material after ultraviolet-C radiation with different exposure times and distances
10.
Effect of different implant angulations and insertion-removal cycles on the retentive force of zirconia and coated titanium denture attachments: An in vitro study
11.
Finite element analysis on implant-supported bar with different geometric shapes
EN
